Skip to content
AkerminMeasure. Monitor. Improve. Compare Products
Review

Kinpthy 1920P Endoscope Review: The Name Says Dual Lens, the Bullets Say One

Two things on this page do not add up. The product name ends in Dual Lens while all five bullets describe a single camera, and the box contents include the mirror you only need on a single lens probe. Separately, a 2.0 MP sensor cannot fill a 1920 by 1440 frame, because that frame is 2.76 megapixels of pixels.

As an Amazon Associate, Akermin earns from qualifying purchases. Product links on this page are affiliate links.

Kinpthy 1920P Endoscope Review: The Name Says Dual Lens, the Bullets Say One

Kinpthy · Endoscope Camera with Light,1920P HD Borescope Tools(16.4ft Dual-Lens) | IP67 Waterproof Endoscope, Snake Camera with 8 Adjustable LED Lights, Semi-Rigid, Inspection Borescope for iOS and Android

View on Amazon

Price and availability are shown on Amazon and can change at any time.

A phone powered inspection camera on a 7.9 mm probe and a 16.4 ft semi rigid cable, with a stated 2.0 MP camera producing 1920 by 1440 stills and video at close range, eight brightness adjustable LEDs, an IP67 probe claimed to work under water to 3.28 feet for one hour, connectors for Android, Lightning and Type-C, a named app, and magnet, hook, mirror and cap accessories. The specification is better than the usual for the money, but the page contradicts itself twice: the name promises dual lenses that the bullets never describe, and the image size is larger than the stated sensor can produce.

The name says dual lens and every bullet describes one camera

The product name ends with the words Dual-Lens. Then read the five bullets looking for the second lens.

The first bullet describes a 7.9 mm probe and a 2.0 MP HD endoscope, singular, producing one image size for stills and one for video. The third bullet describes the probe and the IP67 rating, again in the singular. The fourth describes the light. The fifth lists the box contents. Nowhere is there a second lens, a side view, a switch between views, or two image sizes for two cameras. Nothing on the page tells you how you would select the other lens if there were one.

The box contents then make the problem worse rather than better, because they include a mirror.

A mirror is the accessory you clip to the end of a single lens probe in order to see sideways. It is the low technology answer to the same problem a side facing second lens solves, and it is a poor one, because it reverses the image, loses light and gets dirty. Nobody packs a mirror with a probe that already has a side camera. The listing own box contents argue against the listing own name.

There are two readings and both should change your decision. Either it is a single lens probe with a mirror and the name is wrong, in which case you are buying a competent single lens tool and should price it as one. Or it genuinely has two lenses and the bullets failed to describe the feature the name is built on, in which case every figure about the second camera is unknown. Settle it in writing before buying. Our roundup of USB borescopes for phones covers how the two configurations compare.

Two megapixels cannot fill a 1920 by 1440 frame

The first bullet states a 2.0 MP HD endoscope, and then gives the image size as 1920 by 1440 for both stills and video. Multiply those out.

1920 multiplied by 1440 is 2,764,800 pixels. That is 2.76 megapixels. A two megapixel sensor in the same four to three shape is around 1600 by 1200, which is 1.92 megapixels. The stated output is therefore roughly forty percent more pixels than the stated sensor has to give.

A sensor cannot produce more distinct samples of the scene than it has photosites. So the extra pixels are being manufactured by interpolation, which fills the gaps by averaging neighbours. The file gets bigger. The amount of real detail does not change, and it stays wherever the optics and the sensor put it.

The label is doing similar work. Resolution conventions count vertical lines, which is where 1080p comes from. On that convention 1920 by 1440 is a 1440p image, and the honest statement would be that it is taller than a 1080p frame, which is true and worth something. Calling it 1920P quotes the horizontal number to produce a bigger one.

None of this makes it a bad camera. A sensor near two megapixels behind a small fixed lens is a normal specification at this probe diameter, and the frame being taller than 1080p is a genuine advantage in a square-ish bore. It does mean you should not expect the detail a 2.76 megapixel image implies. Our background piece on what a borescope is useful for covers how much resolution the common jobs need.

At close range is doing quiet work in that sentence

The end of the first bullet is a disclosure, and a useful one: clear snapshot images and high quality video at close range.

A probe this size carries a fixed focus lens. There is no focus mechanism to put in a 7.9 mm tube at this level, so the optics are set at manufacture to a single distance and there is a band either side of it where the image is acceptably sharp. Inside that band the sensor is the limit. Outside it, nothing about the sensor helps, because the image arriving at it is already soft.

Crediting the qualifier is fair. Many listings in this category claim a resolution with no mention of the distance it applies at, which is a stronger claim and a less honest one. The criticism is that the band is not published, and the band is what decides the work. Whether the sharp zone runs from two to six centimetres or from five to fifteen changes whether you can read a casting number on a block, inspect a weld or only establish that something is present.

The field of view is missing for the same reason and matters alongside it. Focal distance and field of view together determine how much of a pipe wall you see in one frame, and therefore how many passes a full inspection takes.

An hour at one metre is more than the code requires

The third bullet is the best written line on the page, because it turns a code into a figure anyone can check.

An ingress protection code has two digits. The first is solids, and six is the top level, dust tight. The second is liquids, and seven means immersion, defined by a test at a depth of one metre for thirty minutes. The listing states the probe operates under water up to 3.28 feet for one hour. 3.28 feet is one metre, and one hour is twice the duration the code requires, so the claim is specific and it goes beyond the label.

Be clear about what it does not cover, because drain and sump work involves all of it. Immersion protection says nothing about pressure beyond that depth, nothing about moving or jetted water, nothing about oil, fuel or solvent, and nothing about heat. It also applies to the probe and the cable, not to the connector, and certainly not to the phone you have tethered to the other end. A wet probe plugged into a phone is an obvious hazard to the phone and the listing does not discuss it.

Sixteen feet of semi rigid cable, and no way to aim the tip

Specification Published in the listing
Probe diameter 7.9 mm
Camera 2.0 MP, stated output 1920 by 1440 for stills and video
Cable 16.4 ft, semi rigid
Lighting 8 LEDs, brightness adjustable
Ingress protection IP67, under water to 3.28 feet for 1 hour
Host devices iOS 9.0 and above, Android 7 and above
Connectors supplied Android, Lightning, Type-C
Accessories Magnet, hook, mirror, protective cap
Second lens or side view Not stated in the listing bullets
Focal distance range Not stated in the listing bullets
Field of view Not stated in the listing bullets
Native sensor resolution Not stated in the listing bullets
Frame rate Not stated in the listing bullets
Minimum bend radius of the cable Not stated in the listing bullets
Articulation Not stated in the listing bullets

Semi rigid is the right choice for a cable this long and the trade should be understood before buying. The cable holds the shape you bend into it, which is what lets you push a camera sixteen feet into a duct or a drain without a rod behind it, and it is also what lets the last few inches be aimed at an angle before the probe goes in. What it cannot do is change its mind. Once the tip is in, your controls are push, pull and twist, and redirecting means withdrawing and re-bending.

Being phone powered cuts both ways in the usual manner. There is no battery to charge and none to fail, and the screen is better than anything a tool at this level would include. Against that, your phone is now tied to a wet probe, the session depends on a named third party app remaining available and compatible, and the cable length is working against a device you want to keep dry. The app being named at least makes it something you can check before buying rather than after.

At 7.9 mm the probe is thick. That buys the sensor, the eight LEDs and the stiffness the semi rigid cable needs, and it rules out the narrow access jobs. Our overview of borescopes with tiny probe cameras covers the thinner end if access is the constraint.

The buyer this fits, and the question to settle first

This suits long reach inspection where the target is in front of the probe and the route is roughly straight: a drain run, a duct, a wall cavity, under a floor, around an engine bay. Sixteen feet of semi rigid cable, eight adjustable LEDs, a specific immersion claim and a frame taller than 1080p make a capable tool for exactly that, and the three connectors mean it works with whatever phone is in your pocket.

It does not suit narrow access, because of the diameter, and it does not suit anything that needs the tip aimed once it is in, because there is no articulation. Nor does it suit work where the detail has to be read rather than seen, because the focal window is unpublished and the image size overstates the sensor.

And settle the lens question before you buy. If the mirror in the box is the side view, this is a single lens probe and should be judged as one, in which case it is a reasonable one. If there really are two lenses, ask for the specification of the second, because nothing on this page describes it.

Endoscope Camera with Light,1920P HD Borescope Tools(16.4ft Dual-Lens) | IP67 Waterproof Endoscope, Snake Camera with 8 Adjustable LED Lights, Semi-Rigid, Inspection Borescope for iOS and Android

Endoscope Camera with Light,1920P HD Borescope Tools(16.4ft Dual-Lens) | IP67

View on Amazon
MiLESEEY TR20 Thermal Imaging Camera, 320x240 IR, 25Hz | NETD ≤40mk, Portable Handheld, Infrared, Auto Hot/Cold Spot Tracking

MiLESEEY TR20 Thermal Imaging Camera, 320x240 IR, 25Hz | NETD

View on Amazon
FLIR E6 Pro - Commercial Thermal Imaging Camera with Wi-Fi, High Resolution Infrared Camera with FLIR Ignite Cloud

FLIR E6 Pro - Commercial Thermal Imaging Camera with Wi-Fi,

View on Amazon
Teslong Articulating Borescope for Mechanic Automotive HVAC Wall Inspection | 2.0MP HD Endoscope, 8 LED Lights, Two-Way 210°, 4.5" IPS Screen, 32GB, IP67 Waterproof, Semi-Rigid Gooseneck, Carrying Case

Teslong Articulating Borescope for Mechanic Automotive HVAC Wall Inspection |

View on Amazon

Products shown because their documented specifications fit this guide. Price and availability are on Amazon and can change.

Frequently Asked Questions

Is this a dual lens borescope or a single lens one?

The page says both things. The product name ends in Dual-Lens and not one of the five bullets mentions a second lens, a side view or any way of switching between views. Every bullet refers to the camera in the singular. Then the box contents list a mirror, and a mirror is the accessory you clip to a single lens probe precisely to get a sideways view. A genuine dual lens probe with a forward and a side camera has no use for one. Establish the configuration in writing before buying, because the mirror and the second lens solve the same problem and you only want to pay for one.

Why does 2.0 MP not match 1920 by 1440?

Because the arithmetic does not allow it. Multiply 1920 by 1440 and you get 2,764,800 pixels, which is 2.76 megapixels. The bullet states a 2.0 MP camera, and a two megapixel sensor in a four to three shape is around 1600 by 1200, which is 1.92 megapixels. A sensor cannot produce more distinct pixels than it has, so the stated output size is larger than the stated sensor and the difference is being filled in by scaling. Upscaling adds pixels, not detail, and the real limit on what you can see stays where the sensor set it.

What does 1920P mean?

Nothing standard. The convention everyone else uses counts vertical lines, which is why 1080p means 1080 lines tall. The stated image here is 1920 by 1440, so on that convention the honest label would be 1440p. Calling it 1920P quotes the horizontal figure instead, which produces a larger number that reads as an upgrade on 1080p. The underlying image is taller than a 1080p frame, so the claim is not empty, but the label is doing work the specification does not support.

What does semi rigid mean in practice?

That the cable holds whatever shape you bend into it instead of flopping or springing back. That is genuinely useful on a long probe, because it lets you put a curve in the last foot and push the camera along a duct or down a drain without a rod to carry it. The cost is that all the aiming happens before insertion. Once the probe is in, your only controls are push, pull and twist, and if the tip needs to point somewhere else you withdraw it, re-bend it and start again. It is not an articulating probe and it does not claim to be.

What does the IP67 claim actually protect?

Dust and a defined immersion, and only on the probe. The first digit of the code is dust ingress and six is the dust tight level. The second digit is water and seven means immersion to a depth of one metre, which the code defines with a thirty minute test. This listing claims 3.28 feet, which is one metre, for one hour, so the claim exceeds the duration the code requires. What it does not cover is pressure, moving water, oil, solvent or heat, and drain work involves most of those. It also says nothing about the connector or the phone at the other end of the cable.

Will a 7.9 mm probe fit a spark plug port?

No. Probes sold for spark plug access are quoted at around 5.5 mm or less, and 7.9 mm is at the thick end even for general inspection work. What the diameter buys is room inside for a larger sensor, eight LEDs and a cable stiff enough to be semi rigid over sixteen feet. This is a probe for engine bays, drains, ducts, wall cavities and under floors, not for cylinder inspection through a plug port.

Affiliate disclosure: Akermin earns a commission from qualifying Amazon purchases made through links on this page. Our editorial picks are based on documented specifications and owner feedback, not commissions.