Plain-language explanations of the measurements, sensors and numbers behind environmental monitoring.
A guide to choosing between an articulating borescope and a semi rigid probe by matching the steering mechanism and shaft stiffness to the cavity you actually need to inspect.
Read Article→A plain explanation of how borescopes and inspection cameras differ in sensor, display and cable, and which one suits which job.
Read Article→A thermal camera locates the cold or evaporatively cooled patch; a moisture meter confirms whether water is actually there, and the order you use them in decides whether the investigation works.
Read Article→A comparison of self-contained thermal cameras and USB-C phone attachments, covering processing, storage, ergonomics and where each format stops being the right answer.
Read Article→A thermal camera reads surface temperature and finds heat patterns; a borescope puts a lens inside a cavity. The choice depends on whether your fault is thermal or physical.
Read Article→A comparison of spot infrared thermometers and thermal cameras for fault finding, explaining why the camera locates and the thermometer confirms.
Read Article→A field by field guide to the Ex marking on gas detection instruments, what each part constrains, and what the marking does not tell you.
Read Article→A man down alarm exists because the most dangerous gas exposure is the one that leaves you unable to press the panic button yourself.
Read Article→A four gas detector is a personal alarm for oxygen, combustibles, CO and H2S, not a leak locator or a confined space entry system.
Read Article→This article explains what each instrument measures, why their specifications are not interchangeable, and how to tell which one a given task actually requires.
Read Article→This guide explains the engineering and workflow differences between phone-attached and standalone thermal cameras so you can choose the form factor that matches your inspection routine.
Read Article→Plain walls lack the geometry, texture and temperature contrast a thermal image needs to show recognisable landmarks.
Read Article→