Skip to content
AkerminMeasure. Monitor. Improve. Compare Products
Guide

Fluke 374 FC vs 377 FC: Is FieldSense Worth the Step Up?

Two wireless Fluke clamps that look nearly identical on a shelf. One difference between them changes how many times you open a live enclosure, which is the kind of difference worth paying for.

By the Akermin Editorial Team · 3 min read

As an Amazon Associate, Akermin earns from qualifying purchases. Product links on this page are affiliate links.

Short answer: the 377 FC is the better buy for anyone who takes voltage and current readings together, especially on three phase systems, because FieldSense removes the probe-on-conductor step. The 374 FC remains a fully capable 600 A wireless clamp if you rarely need voltage at the same moment.

What Each Listing States

Item Fluke 374 FC Fluke 377 FC
Current 600 A AC and DC, True RMS AC and DC, True RMS
Voltage through the jaw Not stated Yes, FieldSense
Non-contact voltage Not stated in the bullets Stated in the product name
Flexible probe Not stated in the bullets iFlex stated
Wireless Fluke Connect, read on a phone at a distance Wireless stated
Recording Results to phone and cloud Not detailed in the bullets
Three phase Not stated in the bullets Complete three phase voltage and current tests with fewer steps

What FieldSense Changes in Practice

A conventional clamp takes current with the jaw and voltage with probes. That means two operations, two hands and metal touching a live conductor for the second one. FieldSense, as Fluke describes it, takes both with the jaw. The saving is not just time: it is one fewer occasion on which a probe tip is near an energised part, and on a three phase measurement it is three fewer.

The 377 FC listing makes the three phase case explicitly, stating complete three phase voltage and current tests with fewer steps. Anyone who has balanced a three phase load knows how much of the job is arranging leads safely rather than reading numbers.

The Wireless Part Is the Other Safety Feature

The 374 FC listing describes a workflow that deserves more attention than it gets: clamp the meter in place, close the enclosure, step back and read the measurement on a phone. That is a genuine reduction in exposure, and the listing states it plainly, including the reduction in protective equipment that follows from standing outside the boundary. Recording straight to the phone and the cloud also removes the transcription step, which is where readings get written down wrong.

iFlex Deserves a Mention

A rigid jaw is limited by its opening. A busbar, a bundle of conductors or a large cable in a crowded panel often cannot be clamped at all. A flexible current probe wraps around what a jaw cannot reach and is thin enough to slide into a congested enclosure. If your work involves service entrances, large motors or older panels, this is frequently the difference between taking a measurement and giving up.

Who Buys Which

  • Industrial and commercial electricians on three phase: 377 FC.
  • Anyone measuring voltage and current together, repeatedly: 377 FC.
  • Current-focused work where voltage is occasional: 374 FC.
  • Basic residential current checks: neither; see Fluke 323 versus 325.

How We Research

All figures are quoted from the manufacturer listings. We did not run laboratory tests and publish no measurements of our own. Ranking in the clamp meter roundup.

FLUKE-374 FC 600A Ac/Dc TRMS Wireless Clamp

FLUKE-374 FC 600A Ac/Dc TRMS Wireless Clamp

View on Amazon
Fluke 377FC AC/DC TRMS Non-Contact Voltage Wireless Clamp w/iFlex

Fluke 377FC AC/DC TRMS Non-Contact Voltage Wireless Clamp w/iFlex

View on Amazon
Fluke 325 True-RMS Clamp Meter with Frequency, Temperature & Capacitance Measurements

Fluke 325 True-RMS Clamp Meter with Frequency, Temperature & Capacitance

View on Amazon

Products shown because their documented specifications fit this guide. Price and availability are on Amazon and can change.

Frequently Asked Questions

What is FieldSense?

The Fluke 377 FC listing describes it as measuring voltage and current with the clamp jaw, giving faster and safer testing without touching a live wire. In practice it means a voltage reading without putting probes on a conductor.

Do both connect to a phone?

Yes. Both are Fluke Connect instruments. The 374 FC listing states reading measurements on your phone at a safe distance and recording results to the phone and the cloud.

Why does reading at a distance matter?

Because it lets you leave the meter in place, close up and step back before taking the reading. The 374 FC listing puts it directly: read measurements at a safe distance wearing less protective equipment while the meter takes the risks.

Does the 377 FC include a flexible probe?

The product name states iFlex, the flexible current probe that wraps around conductors too large or awkward for a rigid jaw.

Affiliate disclosure: Akermin earns a commission from qualifying Amazon purchases made through links on this page. Our editorial picks are based on documented specifications and owner feedback, not commissions.