As an Amazon Associate, Akermin earns from qualifying purchases. Product links on this page are affiliate links.
Humidity is a property of air, meaning the water vapour it contains, while a hygrometer is the instrument that reports that property as a number. They are not alternatives, so the comparison only becomes useful once you notice that several distinct quantities are all called humidity in ordinary speech. Relative humidity, absolute humidity, mixing ratio and dew point describe exactly the same air in four different ways, and a domestic hygrometer senses one of them and computes any others it shows you.
One is a property of the air, the other is a device
Air is a mixture of gases, and water vapour is one of the components in that mixture. How much of it there is determines whether washing dries, whether timber shrinks, whether a cold window streams and whether your throat feels raw in winter. That quantity exists whether or not anyone measures it, in the same way a room has a temperature before a thermometer enters it.
A hygrometer is a manufactured object with a sensing element, a conversion step and a display. It reports an estimate of the property, limited by its tolerance, its placement and its state of calibration. Keeping the two concepts apart saves a lot of argument, because a disagreement between two hygrometers is a fact about the instruments, while a disagreement between two rooms is a fact about the building. The search phrase that brings people to this question is usually really asking which humidity number they should be looking at, which is the rest of this article.
Which humidity the number on the screen refers to
Four quantities, four different uses. Relative humidity is the ratio of the water vapour pressure present to the saturation vapour pressure at the same temperature, expressed as a percentage, and it is what almost every display shows. Absolute humidity is the mass of water vapour per cubic metre of air. Mixing ratio is the mass of water vapour per kilogram of dry air. Dew point is the temperature to which the air would have to be cooled for condensation to begin.
Relative humidity dominates consumer instruments because it is what the sensing element naturally responds to, and because comfort and mould guidance are written in those terms. Its weakness is that it moves when nothing but temperature has changed, which makes it a poor way to compare two rooms at different temperatures or to track whether a dehumidifier is removing water. Mixing ratio and dew point do not share that weakness, since both stay constant while air is simply warmed or cooled.
Same air, two temperatures, two different percentages
This is the point where the distinction stops being academic. Take one parcel of air holding eight grams of water vapour per kilogram of dry air, which gives a vapour pressure near 12.9 hectopascals at ordinary atmospheric pressure, and simply change its temperature. Nothing is added and nothing is removed.
| Air temperature | Saturation vapour pressure | Relative humidity shown | Dew point |
|---|---|---|---|
| 15 degrees Celsius | about 17.0 hPa | about 76 percent | about 10.7 degrees Celsius |
| 20 degrees Celsius | about 23.4 hPa | about 55 percent | about 10.7 degrees Celsius |
| 25 degrees Celsius | about 31.6 hPa | about 41 percent | about 10.7 degrees Celsius |
The same air reads 76 percent, 55 percent and 41 percent on a hygrometer depending only on how warm it is, while the dew point sits unmoved at roughly 10.7 degrees Celsius throughout. The practical reading of that table is that any surface in the room colder than about 10.7 degrees will collect condensation no matter which of those three percentages the display happens to be showing. Cold corners, window reveals and uninsulated external walls are exactly where that applies, and the full definition is worked through in what relative humidity means.
What the sensor measures physically against what it displays
Physically, a capacitive element measures capacitance. A polymer film between two electrodes absorbs water in proportion to the water activity of the surrounding air, the dielectric constant of the film rises as it does so, and an on chip circuit converts that change into a digital value. The firmware then applies a factory calibration curve, corrects for the measured temperature, and prints a percentage. Three conversions sit between the physics and the display.
That chain explains why specifications read the way they do. The Govee H5074 mini humidity sensor states a Swiss made sensor with humidity accurate to plus or minus 3 percent RH and temperature to plus or minus 0.54 degrees Fahrenheit, two separate tolerances because two separate measurements feed the result. Instruments aimed at record keeping go further and state the window over which the tolerance applies: the HOBO temperature and humidity data logger states accuracy of plus or minus 3.5 percent RH from 25 percent to 85 percent RH, within an overall measuring range of 15 percent to 95 percent, together with an IP50 rating and logging intervals from one second to eighteen hours.
Simpler instruments often publish the function and leave the number out. The Inkbird ITH-10 thermometer and hygrometer states that it records maximum and minimum temperature and humidity and switches between Fahrenheit and Celsius, while a humidity accuracy figure is not stated in the listing bullets. That absence is itself information: an instrument without a published tolerance cannot support a conclusion that depends on a few percent.
When the distinction changes a decision
Four everyday decisions turn on which quantity you use.
- Condensation and mould. Use dew point, or measure relative humidity at the cold surface. A room reading of 55 percent is irrelevant if the window reveal is below the dew point.
- Is the dehumidifier working. Use dew point or mixing ratio. Relative humidity can fall purely because the machine warmed the room, with no water removed at all.
- Comparing two rooms. Use dew point if their temperatures differ. Comparing percentages across a warm lounge and a cold spare room compares the thermometers as much as the air.
- Storing instruments, documents or an instrument case. Use relative humidity, because material equilibrium tracks water activity, which is what relative humidity expresses.
Ventilation decisions in winter follow the dew point rule and often feel counterintuitive. Cold outdoor air at 90 percent relative humidity usually holds less water than warm indoor air at 55 percent, so opening a window lowers the indoor moisture content even though the outdoor percentage is higher. The percentages say the opposite; the dew points tell the truth. Choosing an instrument that displays or lets you derive dew point is therefore worth more than one extra digit of resolution, which is a theme running through our comparisons of humidity meters and temperature and humidity monitors.
Saying which humidity you mean before you log anything
The habit that fixes all of this is writing down the quantity with the number. A log entry reading 55 percent is ambiguous in a month. An entry reading 55 percent RH at 20 degrees Celsius, dew point near 10.7 degrees, is still usable next winter, and it can be compared against a reading taken at a different temperature without re deriving anything.
Then treat the instrument as a separate question from the quantity. Check it against a known reference before relying on small differences, which is what calibrating a hygrometer sets out, and keep the published tolerance in view when you interpret a gap between two devices. Our notes on the Allsun thermometer and hygrometer work through what a stated tolerance does and does not let you conclude.
Frequently Asked Questions
So is hygrometer just another word for humidity?
No. Humidity is a condition of the air, like pressure or temperature. A hygrometer is a manufactured object that reports that condition as a number. Asking which is better is like asking whether length is better than a tape measure, and the confusion usually hides a more useful question about which humidity quantity you need.
Which humidity figure should I use to judge mould risk?
Dew point, or relative humidity read at the coldest surface rather than in the middle of the room. Mould and condensation depend on how close a surface is to saturation, and a cold external wall can be near saturation while the room air reads comfortable. A room figure of 55 percent and a wall surface at 12 degrees Celsius can mean condensation even though the display looks fine.
Why does my humidity rise overnight with nothing switched on?
Usually because the air cooled. If no water enters or leaves a sealed room, the absolute moisture stays constant while the saturation point drops with falling temperature, so relative humidity climbs. Occupants breathing in a closed bedroom add moisture as well, but temperature alone is enough to move the percentage substantially.
Does a hygrometer measure dew point directly?
Only a chilled mirror instrument does, by cooling a surface until dew forms and reading its temperature. A domestic hygrometer calculates dew point from the relative humidity and temperature it measured, using a standard vapour pressure equation, so the result carries the uncertainty of both inputs.
What is the difference between absolute humidity and mixing ratio?
Absolute humidity is water vapour mass per unit volume of air, in grams per cubic metre, and it changes when the air expands or is compressed. Mixing ratio is water vapour mass per unit mass of dry air, in grams per kilogram, and it does not change with expansion. That is why mixing ratio is preferred when air is being heated or moved.